Karachi GupShup
Karachi GupShup
Karachi GupShup
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Karachi GupShup

Karachi GupShup
 
HomeGame ZoneSearchLatest imagesRegisterLog in

 

 Development of the A380

Go down 
AuthorMessage
meodingu
Member
meodingu


Male Number of posts : 270
Pointz :
Development of the A380 Left_bar_bleue0 / 1000 / 100Development of the A380 Right_bar_bleue


Development of the A380 Empty
PostSubject: Development of the A380   Development of the A380 EmptyWed Sep 29, 2010 8:57 pm


Development of the A380
Main article: Airbus A380

In the summer of 1988 a group of Airbus engineers led by Jean Roeder began working in secret on the development of an ultra-high-capacity airliner (UHCA), both to complete its own range of products and to break the dominance that Boeing had enjoyed in this market segment since the early 1970s with its 747.[43] The project was announced at the 1990 Farnborough Air Show, with the stated goal of 15% lower operating costs than the 747-400.[44] Airbus organised four teams of designers, one from each of its EADS partners (Aérospatiale, DaimlerChrysler Aerospace, British Aerospace, EADS CASA) to propose new technologies for its future aircraft designs. In June 1994 Airbus began developing its own very large airliner, then designated as A3XX.[25][45][46] Airbus considered several designs, including an odd side-by-side combination of two fuselages from the Airbus A340, which was Airbus’s largest jet at the time.[47] Airbus refined its design, targeting a 15 to 20 percent reduction in operating costs over the existing Boeing 747-400. The A3XX design converged on a double-decker layout that provided more passenger volume than a traditional single-deck design.

Five A380s were built for testing and demonstration purposes.[48] The first A380 was unveiled at a ceremony in Toulouse on 18 January 2005, and its maiden flight took place on 27 April 2005. After successfully landing three hours and 54 minutes later, chief test pilot Jacques Rosay said flying the A380 had been “like handling a bicycle”.[49] On 1 December 2005, the A380 achieved its maximum design speed of Mach 0.96.[48] On 10 January 2006, the A380 made its first transatlantic flight to Medellín in Colombia.[50]
Airbus A380, the largest passenger jet in the world, entered commercial service in 2007.

On 3 October 2006, CEO Christian Streiff announced that the reason for delay of the Airbus A380 was the use of incompatible software used to design the aircraft. Primarily, the Toulouse assembly plant used the latest version 5 of CATIA (made by Dassault), while the design centre at the Hamburg factory were using the older and incompatible version 4.[51] The result was that the 530 km of cables wiring throughout the aircraft had to be completely redesigned.[52] Although no orders had been cancelled, Airbus still had to pay millions in late-delivery penalties.[51]

The first aircraft delivered was to Singapore Airlines on 15 October 2007 and entered service on 25 October 2007 with an inaugural flight between Singapore and Sydney.[53][54] Two months later Singapore Airlines CEO Chew Choong Seng said that the A380 was performing better than both the airline and Airbus had anticipated, burning 20% less fuel per passenger than the airline's existing 747-400 fleet.[55] Emirates was the second airline to take delivery of the A380 on 28 July 2008 and started flights between Dubai and New York[56] on 1 August 2008.[57] Qantas followed on 19 September 2008, starting flights between Melbourne and Los Angeles on 20 October 2008.[58]




__________________
hotfile link
Auto Warranty
Back to top Go down
 
Development of the A380
Back to top 
Page 1 of 1
 Similar topics
-
» Research and development
» Development of scientific understanding
» Development of the Airbus A300

Permissions in this forum:You cannot reply to topics in this forum
Karachi GupShup :: Karachi GupShup Information :: Welcome to Karachi GupShup-
Jump to: